IEcuMessageBasedNode

Summary

Represents an ECU message node.

Methods

IEcuMessageBasedNode.disable()

IEcuMessageBasedNode.enable()

IEcuMessageBasedNode.get_value()

IEcuMessageBasedNode.reset()

IEcuMessageBasedNode.reset_value()

IEcuMessageBasedNode.set_value()

IEcuMessageBasedNode.signal()

IEcuMessageBasedNode.start()

IEcuMessageBasedNode.stop()

IEcuMessageBasedNode.trigger()

Properties

IEcuMessageBasedNode.data_base

IEcuMessageBasedNode.is_started

Events

IEcuMessageBasedNode.on_reset_ecu()

IEcuMessageBasedNode.on_start()

IEcuMessageBasedNode.on_stop()

IEcuMessageBasedNode.on_value_changed()

Structure

class IEcuMessageBasedNode

disable(message: str)

Disables a message of the ecu.

Parameters

message (str) – message can be message_name or message_id. Examples: "ST_ENERG_GEN", "*"(this is to indicate that this applies to all messages of the ECU.)

enable(message: str)

Enables a message of the ecu.

Parameters

message (str) – message can be message_name or message_id. Examples: "ST_ENERG_GEN", "*"(this is to indicate that this applies to all messages of the ECU.)

get_value(message: str) → IDictionary

Gets the values of the signals of the specified message of the ecu.

Parameters

message (str) – The path to the message. Examples: "ST_ENERG_GEN".

Returns

The values of the signals of the specified message

Return type

IDictionary

get_value(message: str, signal: str) → int

Gets the value of a specific signal of a message of the ecu.

Parameters

• message (str) – The path to the message. Examples: "ST_ENERG_GEN".

• signal (str) – The name of the signal.

Returns

The value of the signal

Return type

int

reset() → bool

Resets the ECU.

Returns

True if the operation was successful, False otherwise.

Return type

bool

reset_value(message: str = None, signal: str = None)

Resets the value of a specific message/signal of the ecu to the default value.

Parameters

• message (str) – [optional] The path to the message. Examples: "ST_ENERG_GEN", "*"(this is to indicate that this applies to all messages of the ECU.) .empty or None means the entire messages of the ECU will be reset.

• signal (str) – [optional] The name of the signal, empty or None means all the signals values of the message will be reset.

set_value(message: str, value: IDictionary)

Sets the value of (a) signal(s) of the message to a specific value.

Parameters

• message (str) – The path to the message. Examples: "ST_ENERG_GEN", "*"(this is to indicate that this applies to all messages of the ECU.)

• value (IDictionary) – The value of the signal(s) to be set, None means default value.

set_value(message: str, signal: str, value: int or None)

Sets the value of the signal of the specified message to a specific value.

Parameters

• message (str) – The path to the message. Examples: "ST_ENERG_GEN", "*"(this is to indicate that this applies to all messages of the ECU.)

• signal (str) – The name of the signal to be set, None means default value.

• value (int or None) – The value of the signal to be set, None means default value.

signal(signalName: str) → SignalValue

Gets a signal by its name.

Parameters

signalName (str) – The name of the signal.

Returns

Signal value.

Return type

SignalValue

signal(message: str, signalName: str) → SignalValue

Gets a signal by message and signal name.

Parameters

• message (str) – The path to the message. Examples: "ST_ENERG_GEN", "*"(this is to indicate that this applies to all messages of the ECU.)

• signalName (str) – The name of the signal.

Returns

Signal value.

Return type

SignalValue

start()

Starts the ECU

stop()

Stops the ECU.

trigger(message: str)

Triggers an enabled transmitted message of the ecu to send a message.

Parameters

message (str) – message is message_id_or_name

@on_reset_ecu

Event is triggered when the capture of Ethernet ECU RBS is reset.

@on_start

Event is triggered when the capture of Ethernet ECU RBS is started.

@on_stop

Event is triggered when the capture of Ethernet ECU RBS is stopped.

@on_value_changed(sender: object, e: ValueChangedArgsMsg)

Gets the new value , old value, message id, message name when we set value of signal(s).

Parameters

• sender (object) – The source of the event.

• e (ValueChangedArgsMsg) – An object that contains the event data.

data_base

Takes the database object.

Type

Database

is_started

Checks whether the Ethernet ECU RBS is running.

Type

bool